http://www.stormcam.org/grid-dip/
Why you should wash your car using the dual-Bucket
The two bucket method wash consists of using two separate buckets instead of one during the washing process. A bucket is used as the wash bucket and is filled with a solution of shampoo, the other is used as the bucket rinsing and is filled with clean water.
The reason that the two bucket method it is used as it helps greatly to reduce the transfer dirt and small particles of sand during the washing, which, if issued on the surface of a painting of the cars may cause the light scratches and abrasions.
After a section of the car has been washed, so the idea is to dip your wash implemented in the bucket and rinse completely clean. This allows all the particles of dirt and grit that have been transferred from the car to be released into the rinse water. If used in conjunction with a grain storage (which the dual-bucket should be), these particles can be fully paid and held in a safe and peaceful at the bottom of the bucket.
After the washing phase of lava work can then be immersed in the wash bucket to recharge with a solution of shampoo because it has been rinsed and free of all harmful particulate matter will not transfer them onto the surface of your car paintwork if you keep washing.
A guard of gravel should also be used in the mop bucket that most ensures that if there are stray final particles that have not been released in the bucket Rinse, then they will be safely captured in the custody and will not be collected back by the washing out.
After using the two bucket technique you can verify its effectiveness by slowly emptying the rinse bucket to see dirt and grit particles which have received under the sand at the bottom guard. You can also check the mop bucket to be able to compare it to rinse bucket to see if you have enough rinse your washing implement. The mop bucket should have little or no particle sitting at the bottom if you are correctly using the method in two buckets.
By using the two bucket method in conjunction with the gate guards, washcloths and towels micro-fiber instead of sponges and skins cloth and a foam thoroughly before / rinse aid massively reduce the risk of damage in the form of scratches and abrasions to be imposed during the car painting process cleaning.
Visit title = "car cleaning"> Car Cleaning & Guru Today Discover How to clean your car to a professional level Yourself.
About the Author
Car cleaning professional & enthusiast.
MFJ Presentation: Using MFJ-269 as a Grid Dip Meter