http://www.stormcam.org/fishfinder-plotter/
Winterizing Marine Electronics
Winterizing Marine Electronics
As the first frosts of autumn hits the air and the leaves are whirling on trees, it is time to think from the marina to make sure your boat is ready to weather the winter months. In particular, you'll want to protect all marine electronics dear have you aboard. Follow these simple steps to ensure your sensitive marine gadgets spring to life.
First step: Make the necessary repairs
There is nothing worse than coming back in spring to find your boat and we welcome this first outing on the lake just remember that your marine electronic equipment do not work or you forgot to do Repairs needed at the end of the season. It is now time to make sure that your boat is ready to go when you are. Check all cables and the son for your marine electronics, make backups of waypoints and other data that are at risk of "disappearing" during the winter walk around the boat and take stock of anything else shows signs of wear or is in need of replacement.
Step Two, remove and store sensitive Marine Electronics
Chances are more marine electronics will do well if you wrap them well and leave them with your boat, but if you are not that it hurts to never delete items. Check the manufacturer's instructions to see if the electronics are extremely sensitive to temperature cold. If you bring your boat out of water is also a good idea to remove the battery. You should check the battery level and increase the load spring before returning on board.
Depending on the complexity of your marine electronics, if you decide to delete everything you want to be sure you can put it back – this is particularly important if you have several components connected together such as a Fish Finder, GPS marine and a plotter.
Bring a touch, a stack of envelopes or zip lock bags and a hat with you. Use the wheel to wiring diagrams If you remove anything or remove any of your marine electronics for storage. Use envelopes or bags to store screws, bolts and accessories tiny and mark each bag with the sharpie if you know what belongs to what.
It's a good idea to take with you everything that is not bolted to avoid the possibility of someone walking off with it while you're not careful.
Step Three: Putting Your Marine Electronics hibernating
Marine electronic devices are sensitive to static electricity, and all equipment e left on your ship is under attack by salt water and winter. Items that you delete must be wrapped first in anti-static bag, then wrapped in a soft, padded for protection. Keep these is a dry sheltered from the winter. All electronic devices that let you on board must first be wrapped in absorbent material, like a rag or towel and covered in shrink wrap to protect against the elements. The absorbent material will prevent condensation the establishment and destruction of marine electronics.
Electronic equipment can provide many years of good and loyal service when it is well maintained, but it's frankly a pain in the back of having to replace expensive marine electronics that go wrong because you do not take basic measures to protect them.
About the Author
Want to learn more about top-quality marine electronics? MarineWholesales.com has all the leading brands of discount marine electronics for yachting, boating and fishing.
997 cx GPS – PLOTTER fishfinder HUMMINBIRD